Moffam Electricals

Cold Room Nairobi, Kenya - Repair, Installation, and Testing

Moffam electricals is the leading provider of Cold Rooms in Nairobi. With years of proven and tested industry experience, Moffam electricals engineers can install, maintain, test, and repair a vast selection of cold room chambers to ensure that your operations are performing at peak capacity. To learn more about our methods and capabilities, contact our Cold Room Engineers in Nairobi at 0790384109.

Cold Room Maintenance Nairobi ,Kenya

Moffam Electricals offers preventative maintenance programs to provide you peace of mind while ensuring that your investment remains functioning and productive. A list of available services is shown below. Please keep in mind that not all services may be relevant to a certain chamber model or kind.

Desiccant Dryer Check-Out

  • Verify no fault indications exist on front panel and that no lights are burned out
  • Check the react outlet air temperature
  • Verify proper operation of damper actuators
  • Verify proper rotation of drive motor
  • Verify process air blower is operational
  • Inspect desiccant wheel for dirt or debris
  • Inspect desiccant wheel gaskets for wear
  • Clean the process air filter
  • Check for abnormal noise or vibration
Cold Room Nairobi,
Control Panel Check-Out

 

  • Verify that there are no loose wires
  • Measure voltage/amps for all motors
  • Measure voltage/amps for all heaters
  • Verify all alarms function properly
  • Verify window heaters are operational
  • Verify door heaters are operational
  • Verify chamber ceiling lights and light switch are operational
Humidifier Check-Out

 

  • Verify there is not any mineral deposits
  • Measure voltage/amps of each humidifier
  • Remove any scale build-up inside the humidifier
  • Check water supply pressure
  • Check for any leaks or signs of corrosion
Condensing Unit/Plenum Check-Out

 

  • Check refrigerant charge
  • Check compressor oil level
  • Check system operating pressures
  • Check CPR pressure setting
  • Check capillary tubes do not rub
  • Verify no oil traces are present
  • Verify no leaks are present
  • Clean the condenser coils if needed
  • Measure compressor voltage/amps
  • Measure crankcase heater voltage/amps
  • Measure condenser fan voltage/amps
  • Check for any abnormal noise or vibration

Cold Room Testing Nairobi, Kenya - Cold Room Calibration Nairobi

We offer cold room testing and calibration in addition to cold room installation and repair. Cold Room Chambers are required to operate at specific levels to protect items and processes.

Calibrations are crucial to guaranteeing the correctness of your industry’s goods and investments. The usage of these standards ensures that your instruments are calibrated to a standard (NIST National Institute of Standards and Technology) so that they meet or surpass the manufacturer’s specifications.

We provide a variety of services and programs, such as single-point verifications and loop calibrations. Our method includes a three-point “as-found” calibration verification. The “as-found” readings are documented and checked to ensure they are within the manufacturer’s limits; if they are, the device is returned to service. We will instantly alert you if any instrument exceeds the tolerance so that you can take the required procedures to memorialize the event.

If the “as-found” values do not fall within the manufacturer’s tolerance, the instrument is calibrated following the manufacturer’s calibration technique. After the calibration is completed, the instrument’s “as-left” readings are documented using the same three points from the calibration verification to ensure the instrument is reading within the manufacturer’s tolerance.

Cold Room Qualification in Nairobi

Typically entailing a three-part process, our Full Qualification services are listed below.

The Installation Qualification (IQ) provides documentation stating that the fundamental aspects of the chamber meet or exceed the design, procurement and installation needs.

The Operational Qualification (OQ) provides further documentation that the chamber is operating as intended with its systems and subsystems, as well as all anticipated operating ranges.

The Performance Qualification (PQ) is utilized for providing documented verification that the process does what it is intended to do, in the correct and anticipated manner (normally performed with either a simulated or actual product load in the chamber).

FRIDGE GAS FILLING SERVICE IN NAIROBI

Usually, gas leakage happens which makes it unlikely during normal operations in a kitchen like using metal objects in the freezer Naturally, this mechanism needs a considerable proportion of Freon to be present at any given point in time. That is the reason when this all-important gas finds its way out of the fridge through any leakage, it gives rise to a series of issues. That is the reason, as soon as you bump against any of these symptoms, you need to call us for the Fridge Repairs for immediate technical assistance.

COMMON GAS REFILL PROBLEMS IN REFRIGERATOR

Produces cool more than enough: The coolant circulates from the evaporator coils and sends cool air into the entire food section. The temperature level of the refrigerator eventually increases then the limit of the fridge. leads to Food damage if the gas refilling is not done refrigerator may not work.

Higher electricity bills: Mostly we get higher bills in the summer seasons but if you notice that there are unseasonal higher bills then it,s a sign that gas leakage is occurring in your refrigerator Because the motor tries to run longer and consumes more electricity.

Freon leakage: Freon is a registered trademark used for a number of halocarbon products. They are stable and low toxicity, generally used as refrigerants gas leak in your fridge freezer is that the temperature doesn’t seem to be as cold as it should be. This could indicate a fridge freezer gas leak. Freon becomes a gas at room temperature, and a liquid when cooled or compressed. A constantly running motor attempts to bring the temperature back to the desired level to compensate for the wrong amount of refrigerant in the unit.

TESTIMONIALS
Gabriel Oluoch
Gabriel Oluoch
2023-11-11
They are the best electrical company in Kenya.They did an amazing work from start to finish from electrical pipe layout, electrical wiring and switch, sockets installation and security system installation. We collaborated well with them and the best of all they are affordable and professional.They are indeed the best electrical contractor in Kenya. Kudos
Mahaf Ali
Mahaf Ali
2023-11-08
Was fast, efficient and very polite
damon adul
damon adul
2023-10-28
Justin, thank you for accommodating our emergency job. You are professional and a pleasure to work with. We look forward to future business opportunities with you. Kind regards, Team@Havila
Jones Bageni
Jones Bageni
2023-10-26
I recommend moffam electricals as best security system installers in Kenya. They did a great job,they did CCTV cameras installation and electric fence installation for us and we were proud with their services.
Kimani James
Kimani James
2023-10-23
Well and responsible electrician than I would recommend to anybody anytime...Such an experienced and professional company team. For cctv and security systems I am happy for your services
Kiniti Patrick
Kiniti Patrick
2023-10-13
Excellent service, knowledgeable electricians and very responsive. Open 24HRS.
danson nyagah
danson nyagah
2023-10-03
I got the Best fridge repair services from this guys, their technicians are honest knows what they do and the best of all is they are always on time
Hudson Njama
Hudson Njama
2023-08-26
Best electrician in Kenya....fast in response and pocket friendly.
Chat With Us
Scan the code
call us now